A standard pallet in the US is the 48x40-inch GMA pallet; 3PLs price storage on it and add charges when freight exceeds its footprint or height.
In the United States, the standard pallet is the GMA (Grocery Manufacturers Association) pallet: 48 inches long by 40 inches wide, wood, four-way entry, rated for roughly 2,500 lb of dynamic load. Nearly every rack, trailer, dock plate and warehouse rate card in the US assumes this footprint. A 53-ft trailer holds 26 of them single-stacked; a 40-ft container holds about 20; a 20-ft container about 10.
For an importer, the standard pallet is the unit you are billed on. A 3PL quotes storage per pallet per month, and that quote assumes the freight fits the footprint, stays within a height limit (commonly 48 inches including the pallet), is shrink-wrapped, and is stable enough to stack. Freight that overhangs the footprint, stands 70 inches tall, or cannot be stacked takes more rack space or floor space and is priced accordingly.
Typical cost: industry surveys put standard pallet storage at $15–$40 per month, most often $18–$25, averaging about $20. Non-standard pallets are usually quoted by footprint (square feet of floor occupied) or as an oversized-pallet surcharge. Euro pallets (1200x800 mm) and Asian 1100x1100 mm pallets do not fit US racking cleanly and often get restacked at receiving.
Common mistakes: shipping on non-standard or flimsy export pallets that break on the forklift; building pallets taller than the rack beam allows; and assuming "one pallet" on the quote means any pallet. Ask the 3PL for its standard pallet definition in writing, with the height limit, and build to it.
Pallet count, orders per month, channels, where the containers land. An executive comes back with a real quote — within 24 business hours.