A pallet position is one slot of warehouse storage sized for a standard pallet; 3PLs bill storage by the number of positions occupied each month.
A pallet position is one storage slot in a warehouse sized to hold one standard pallet, whether that slot is a rack beam opening or a marked square on the floor. When a 3PL quotes storage "per pallet per month," it is quoting per pallet position occupied. The position is the unit of capacity: a 320,000 sq ft building might hold tens of thousands of positions depending on rack height and aisle width.
It matters because you pay for the position, not the product. A half-empty pallet occupies a full position. A pallet 10 inches too tall for a standard rack opening occupies an oversized position or two standard ones. A non-stackable pallet on the floor blocks the positions above it. Understanding how your freight maps to positions is how you predict your storage bill from a packing list.
How it is measured: billing methods vary and matter more than the rate. Some 3PLs bill on the count at month-end, some on the peak count during the month, some on average daily occupancy, and some charge a full month for any pallet present on the first of the month. Industry averages of about $20 per position per month hide wide differences in how the count is taken.
Common mistakes: comparing two 3PLs' per-pallet rates without comparing their billing method; shipping freight that cannot stack and then being surprised by floor-space pricing; and leaving a dozen partial pallets of slow SKUs each occupying a full position for years. Consolidate partials and liquidate dead stock; positions are rent.
Pallet count, orders per month, channels, where the containers land. An executive comes back with a real quote — within 24 business hours.