Free Tool · Resources

Pallet Calculator: cases per pallet, TI/HI, and what it costs to store.

Cases per pallet, load height and weight, trailer fit, and whether you qualify for the standard-pallet rate.

TI × HIcases per pallet
53'trailer & container fit
$10 / $15standard-pallet rate check

Your case and pallet

Outer carton dimensions in inches, weight in pounds. Results update as you type.

Case (outer carton)
Pallet

Results

Tries straight, rotated and two-band interlocked layers, no overhang. Pinwheel patterns can occasionally add a case — ask us to run yours.

Cases per pallet
—
Enter case dimensions to begin.

Load height

—
in, pallet included

Load weight

—
lb, pallet included

Footprint used

—
of the pallet top

Limited by

—
 
Top view — one layer
Side view — layers

Standard pallet

40×48 footprint, 60 inches or under, shrink-wrapped and stackable three high — this takes one pallet position and gets GSW's published low-end rate.

$10per pallet / month · Orangeburg, SC
$15per pallet / month · Oxnard, CA

Want this priced for your actual freight?

Send us case counts, SKUs and where it ships. An executive returns a full quote — receiving, storage, pick-pack and outbound — within 24 business hours. Published storage rates.

Get a GSW quote →
How the math works

TI × HI, and why 48 inches is the number that matters.

TI (tier) is how many cases fit in one layer of the pallet; HI (high) is how many layers you can stack. Multiply them and you have cases per pallet — the number retailers print on routing guides and the number a 3PL uses to receive, count and bill your inventory.

Cases per layer

The calculator divides the pallet length and width by the case length and width, rounds down, and multiplies. With rotation allowed it also tries the case turned 90°, and the interlocked patterns real pallet builders use — one band of cases straight, the next band turned — and keeps whichever layer holds the most. It never lets cases hang over the pallet edge: overhang gets crushed in transit, fails retailer inspections and breaks racking width limits.

Layers high

Usable height is your maximum total height minus the pallet itself (about 5.5 inches for a standard wood pallet). Divide by case height and round down. Then the weight cap is checked: if a full stack would exceed the max load weight, the calculator drops layers until it fits and tells you weight was the limit.

Why 48 inches

A pallet that is 60 inches or under, on a 40×48 footprint, is what the industry calls a standard pallet position. It fits standard racking beams, floor-stacks three high in a warehouse with normal clear height, and double-stacks in a 53-foot dry van (about 110 inches inside). Go taller and the pallet needs a bigger rack opening or a floor spot of its own — which is why most 3PLs, GSW included, price standard pallets at the low end and quote oversized loads by the footprint they actually occupy.

Standard pallet sizes

PalletFootprintTypical usePer 53' trailer (single)
GMA / grocery standard48 × 40 inMost US retail, grocery, e-commerce, 3PL billing unit26 (52 double-stacked)
Square 4848 × 48 inDrums, totes, some building products24
Square 4242 × 42 inPaint, telecom, some retail30
Square 3636 × 36 inBeverages, small drums36
EUR / EPAL1200 × 800 mm (47.2 × 31.5 in)European imports; often re-palletized on arrival30

What this means for your storage bill

3PLs bill storage per pallet position per month. The Fulfillment Advisor's 2025 survey of 600+ US warehouses, cited by Fulfill.com, puts that at $15–$40, mostly $18–$25, averaging $20.17. GSW publishes its range: $10–$25 in Orangeburg, SC and $15–$30 in Oxnard, CA, with standard pallets — 40×48, 60 inches or under, shrink-wrapped, stackable three high — at the $10 and $15 ends. Receiving and handling are quoted separately; extremely heavy, oversized, non-stackable or fragile freight is quoted by footprint and can run above the published range. If the calculator above says "standard," that is the rate you would pay. If it says "oversized," the fix is often a shorter stack or a better case orientation, not a bigger bill — send us the numbers and we will run it.

Related: what a 3PL costs, fee by fee · in-house vs 3PL cost calculator · TI/HI in the glossary · 3PL warehousing at GSW.

Pallet questions
How many cases fit on a pallet?
Divide the pallet footprint by the case footprint for cases per layer (TI), then the usable height by the case height for layers (HI). Cases per pallet = TI × HI. On a 48×40 pallet capped at 60 inches, a 16×12×10 case gives 10 per layer and 5 layers: 50 cases.
What do TI and HI mean?
TI is cases per layer (tier); HI is layers high. "10 × 4" means 40 cases. Retailers such as Costco, Walmart and Home Depot specify TI/HI in their routing guides, and 3PLs receive and bill by it.
What is a standard pallet size?
The US standard is the 48 × 40 inch GMA pallet, about 5.5 inches tall and 35–45 pounds. Other common footprints are 48×48, 42×42 and 36×36. Europe uses the 1200 × 800 mm EUR pallet.
How tall can a pallet be?
Most warehouses rack or floor-stack to 48–60 inches total. 48 inches is a common industry cutoff for a standard pallet position; GSW allows up to 60 inches including the pallet, which still stacks three high on the floor, fits standard racking and double-stacks in a 53-ft van with about 110 inches of interior height.
How many pallets fit in a 53-foot trailer?
26 standard 48×40 pallets single-stacked, or 52 double-stacked if the loads are stable. A 48-ft trailer holds 24; a 40-ft container about 20 standard pallets; a 20-ft container about 10.
What does pallet storage cost at a 3PL?
Industry (The Fulfillment Advisor's 2025 survey of 600+ US warehouses, cited by Fulfill.com): $15–$40 per pallet per month, mostly $18–$25, average $20.17. GSW publishes $10–$25 in Orangeburg, SC and $15–$30 in Oxnard, CA; standard 40×48 pallets 60 inches or under, shrink-wrapped and stackable three high, sit at the low end. Oversized freight is quoted by footprint.
What counts as a standard pallet for 3PL pricing?
At GSW: a 40×48 footprint, 60 inches tall or under including the pallet, shrink-wrapped, and stackable at least three high. That pallet takes one position and gets the published $10 (SC) or $15 (CA) rate. Taller, non-stackable or overhanging loads use more space and are quoted by footprint.
How much weight can a pallet hold?
A standard GMA wood pallet is rated around 4,600 lb static and 2,500 lb dynamic (on a forklift). Most 3PLs and carriers cap a pallet load at 2,000–2,500 lb; above that, rack beam ratings, floor stacking and forklift capacity become the constraint.