Resources › 3PL Glossary › GS1-128 Label (UCC-128)
3PL Glossary

What is GS1-128 Label (UCC-128)?

A GS1-128 label (formerly UCC-128) is the standardized carton or pallet barcode label retailers require to scan inbound freight against the ASN.

A GS1-128 label (formerly UCC-128) is the standardized shipping label retailers require on each carton or pallet of an inbound shipment. Its key element is the SSCC, the serial shipping container code, an 18-digit number that uniquely identifies that carton or pallet and ties it to the line in the ASN that describes its contents. The label also carries the ship-to address, the retailer's PO number, the store or DC number, the carrier and often a routing barcode.

The label is how a retailer's DC receives your freight without opening it. The receiver scans the SSCC, the system looks it up in the ASN, and the pallet is accepted with its full contents in one scan. If the label is missing, misprinted, in the wrong spot, or does not match the ASN, the DC receives by hand and charges you for it.

Specs and cost: labels are typically 4x6 inches, printed on thermal stock, and placed to the retailer's spec: often on the lower right of the carton, two labels on adjacent sides of a pallet, 32 to 48 inches off the floor. Retailers specify minimum barcode height and quiet zones. A 3PL may charge a few cents to a dollar for printing and applying each one. The chargeback for getting it wrong is much larger.

Common mistakes: printing labels before the pack-out is final, then moving cartons between pallets; placing the label over a pallet strap or shrink-wrap seam where it tears; using a UPC or an FNSKU where the retailer wants an SSCC; and not test-scanning the label before the truck leaves.

Questions about gs1-128 label (ucc-128)
What is the difference between a GS1-128 label and a UPC?
A UPC identifies a product type and is the same on every unit of that item. A GS1-128 shipping label carries an SSCC, a serial number unique to one specific carton or pallet, plus ship-to and PO data. Retailers scan the SSCC to receive the whole container against the ASN; the UPC identifies what is inside.
Where does the GS1-128 label go on a pallet?
Most retailers require two labels on adjacent sides of the pallet, placed 32 to 48 inches from the floor and clear of straps, stretch-wrap seams and pallet edges so the barcode scans flat. Carton labels usually go on the lower right of the long side. Always check the specific retailer's routing guide for placement.

Related terms

Tell us your 3PL needs.

Pallet count, orders per month, channels, where the containers land. An executive comes back with a real quote — within 24 business hours.

Get your free quote →